Kenlin Case Runner 32-134

A home owner from Detroit, MI says:

date: 05-05-09

My case runner broke, is Case Runner 32-076 the same as the Kenlin 32-134?

date: 05-05-09

I am not familiar with a Kenlin 32-134. Where did you get the product code 32-134? Does your Kenlin part match up to the picture of the 32-076?

A home owner says:

date: 05-05-09

I get the 134 from the inside (pat pen. perhaps?) The picture seems to match...I think that it will work, I'm assuming this is a standard size? Thanks for the quick response!

date: 05-05-09

I just pulled one of the runners from stock and I do not see any numbers on it, only the letter A. This is the only Kenlin case runner we have. I am not sure if it is standard but it is a popular Kenlin part. Your best bet is to match up the measurements on the picture of the 32-076 to your actual runner.

A home owner from Corinth, TX says:

date: 06-08-09

I have the same issue. The number on my runner is 32,134, which appears to be the patent number. The description of the 32-076 appears to be very close but the measurements are slightly different. Have you determined if this one replaced the 32-134?

date: 06-09-09

Which measurements are slightly different?

A home owner from Santa Claus, IN says:

date: 08-28-09

Exact same problem here...I have plastic drawer components that keep breaking. Stamped on the back is "A", "12", and "U.S. Pat 32-134." The widest part of the case runner seems to be just a bit wider than your measurements and the depth seems to be deeper than your measurements. Any luck determining if the 32-076 matches the 32-134 with other clients?

date: 08-28-09

I would not use the number 32-134 found on the on your hardware to determine what replacement part you need. That number could be the serial number for the whole Kenlin track system and not the individual components. Your best bet is to match your hardware to the product images and measurements found on the Web site.

A home owner from Palm Coast, FL says:

date: 09-05-09

I had broken 32-134 parts and replaced them with these 32-076. Perfect fit.

A home owner from Elk Grove, CA says:

date: 11-05-09

I'm looking for a plastic drawer component that look similar to the 32-076 part except... mine has a roller or plastic wheel imbedded in the middle. Everything else looks the same. Do you know if you have the part I'm looking for or will the 32-076 will work as a replacement?

date: 11-05-09

No, the 32-076 is not a replacement for your drawer component with a wheel. SWISCO does not currently carry a similar drawer component with a wheel but check this category section of other drawer replacement hardware.

A home owner from Fayetteville, NC says:

date: 11-08-09

I have Kenlin Rite Trak II parts both case runner and slide. Are these even manufactured any more? If not, what are suitable replacements?

date: 11-09-09

Kenlin is currently not allowing Kenlin Rite-Trak II replacement parts to be available for distribution. For Kenlin Rite-Trak II replacement parts, try contacting your furniture's manufacture or Kenlin directly. You can also try stopping by your local furniture repair shop, they may be able to come up with a solution for you.

A home owner from South Carolina says:

date: 12-05-09

Is there an alternative material to plastic for these parts? Or a better replacement part? I need to replace about 10 and do not want to put something in which will break so easily again.

date: 12-07-09

Currently there is no alternative replacement part for the 32-076 Kenlin case runner. There is a heavy duty version of the Kenlin socket, see 32-082 Kenlin drawer socket.