Kenlin rear drawer socket

A home owner from New Orleans says:

date: 08-08-09

Do you have the rear drawer socket that is round about 3 inch plate with a rectangular 20cm x 11cm for the track. This is kenlin system with the other parts matching a 32-076 & 32-081 for a barndoor dresser?

date: 08-10-09

Do you have the Kenlin Rite-Trak II system? The drawer socket for the Rite-Track II system is pictured below. The Rite-Track II system is not available, you will have to contact either your furniture's manufacturer or Kenlin directly for a replacement. Also check with your local furniture repair shops, they may be able to come up with a solution for you.

A handy person from Minnesota says:

date: 08-19-09

Have Rite-trak II sockets that keep wearing out allowing drawer to drop. Are 32-082 HD sockets compatible if I make adjustment to track length to overcome depth difference in how sockets connect to the track? (shorten track by 3/8"and it all appears to fit) It seems that the HD sockets with metal reinforcement should solve the problem, or will there be an issue with how it works with the plastic end on the case track.

date: 08-20-09

I have never heard of anyone trying to modify their Rite-Trak II tracks to fit Rite-Trak I replacement parts. I would be worried that if it does not work that you ruined the track and not even the proper Rite-Trak II replacement parts will work for you anymore.

A home owner from Antioch Illinois says:

date: 08-29-09

Can Paul from SWISCO please tel me how I can purchase the socket that is pictured above . That is the exact socket that I need for my daughter drawer. The socket is a Rite-Trak ll , I cannot find it anywhere. Please let me know how much for two of them and where can I place the order at. Thanks!!!!!

date: 08-31-09

The Rite-Trak II Kenlin socket as picture above in my earlier post is currently not available for resale. You will need to either contact Kenlin directly, your furniture's manufacturer, or a local furniture repair shop.

A quick learner says:

date: 08-31-09

Hi Im looking for the same ,what is kenlins web address Thanks

date: 08-31-09

Search for Handy Kenlin, the company Web site should appear in the first few results.

A home owner from San Diego, CA says:

date: 01-24-10

What is the secret to getting the socket over the track? Do you soak the plastic in boiling water in order to get it to fit?

date: 01-25-10

I have not heard of anyone having trouble getting the socket over the track. You may have the wrong socket for your drawer track.

A home owner from Oregon says:

date: 01-26-10

My furniture manufacturer sent me a Rite Trak II socket to use with my Rite Trak I Case Runner and it seemed to work really well with the extra reinforced circular design. However, I just looked at it to determine what piece to order since another drawer socket has broken, and the Rite Trak II piece is cracked around the screw through holes. I think this system is the worst system ever for drawer slides and I will never buy another piece of furniture with this track system. I've had at least one socket or case runner break every year for the past 10 years.

date: 01-27-10

The Kenlin Rite-Trak 32-082 has a metal plate to provide extra support. The Kenlin Rite-Trak I hardware will not work if you need Kenlin Rite-Trak II hardware.