Marvin sliding screen door:lower roller assembly

A handy person from Lake Zurich IL says:

date: 08-26-09

I have a Marvin sliding patio door screen circa 1989 or so. The roller and bearing axle assembly broke off a 5/16" wide spring. It looks similar part 84-031 but different in that it looks like the "Stop" is separate from the spring portion. I can't get either the broken spring or stop out of the aluminum frame. It does not have an adjustment screw or fastening screw that i can see. Can you help we with this one?
Thanks
John F.

date: 09-01-09

I am not too familiar with Marvin, however take a look at the 84-074 and the wider version 84-066. Feel free to email a picture of your broken roller to discussions@swisco.com so I can see exactly what you are describing.

A quick learner from Lakke Zurich IL says:

date: 09-07-09

I figured this out. A one sided rivit held in place the spring and wheel assembly. I pounded it out with the blunt end of a finishing nail. I discovered a horizontal adjustment screw at the base of each of the jambs. The attached rivit that came with the parts i ordered didn't work (fit) quite right, so i removed it and used a very small self tapping S.M. screw to hold the new spring and wheel assebly in place to the aluminum screen frame. I'm back in business!! THanks alot John