Repairing a window crank on a Pella casement window

Return to the 39-096 product page.
This discussion is in regards to the SWISCO product:
product thumbnail of 39-09639-096 : Pella Window Crank
Left handed sash crank operator for a Pella casement window.
A quick learner says:
date: 05-28-09
How do you replace the window crank on a pella casement window?
Paul from SWISCO.com responded:
date: 06-04-09
Usually the hard part about replacing this operator is the hidden installation screws on the Pella crank operator body. There is probably a sill cover over these screw holes that you will need to carefully remove to unscrew the operator. After the old Pella crank window operator is removed all you will need to do is screw in the new Pella window crank operator and replace the sill cover.
A landlord from Cleveland, Ohio says:
date: 07-26-09
Is there a gereric operator that can be substituted for and expensive Pella?
Paul from SWISCO.com responded:
date: 07-27-09
No, there is not a substitute for the 39-096 Pella window operator. The 39-096 is an authentic Pella replacement part manufactured by Pella.
Add your own message


(receive an email when responses to your question are made)
Your Basket Is Empty
Swisco Window & Door Weatherstripping ~ Prevent unwanted drafts and reduce heating bills with SWISCO replacement weatherstripping.
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Hardware: Closet | Commercial | Door & Window | Drawer & Cabinet | Lavatory | Tools

Policies: Conditions of Use | Privacy | Shipping | Return/Exchange

© 2009 SWISCO.com "The Replacement Hardware Authority" | About Us | Contact Us