SWISCO - The Replacement Hardware Authority

Additional measurements for the Weather Tight roller

A quick learner from PLACITAS, NEW MEXICO says:
What is the distance of the 8-32 tapped hole form the non-roller end of the 81-002 assembly?

What is the distance between the two threaded holes in the non-roller end of the assembly?

What is the distance from the top of the assembly to the center of the top threaded hole on the non-roller end fo the assembly?

Do you have any idea as to the brands of doors that had these rollers in them ( this is a bonus question - not as important as the measurement questions).

Blaine
Profile picture of Paul Sr.
Paul Sr. from SWISCO responded:
The measurement from the tapped hole on the top of the roller to the end of the assembly is a distance of 1-7/16"
Top of the 81-002 door roller

The distance between the two threaded holes is 1/2" and the distance from the top threaded hole to the top of the housing is 5/16"
Back of the 81-002 door roller

The only other brand besides WT (Weather Tight) would be possibly Peco sliding doors. This roller is definitely not limited to those two door brands though. Let me know if I measured what you asked for and if you need any other measurements.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)