SWISCO - The Replacement Hardware Authority

Karey Screens& Windows Combo Storm Corners and Latches

A handy person from Ridgefield, CT says:
Hi- I'm looking for some replacement corners and latches for the Karey screens and windows, as shown in the attached .pdf. I may want to get up to 4 pairs of L+R latches and corners, but I might start out with just one pair of each to see how they fit before I commit to more.
Hopefully you can pick out some parts that will be good replacements.
Thanks,
Bill
User submitted photos of a screen latch & corner.
Profile picture of Dave
Dave from SWISCO responded:
Hello, Bill. I'm afraid the Karey parts are no longer available. You will need to retro fit another type of corner to repair you frame. Take a look at our 95-125P corners and 91-177 latches and see if you can get these to work on your frames. I cannot guarantee that they will work but they are the closest possible match we have.
A handy person from Ridgefield, CT says:
Thanks Dave. Question about the 95-125P: the dimension in the photo says that the pin is 5/16" diameter - that must be 5/32, right? And a question about my corner - the attached photo shows the pin offset from the center plane of the corner. Do you think that will be a problem or do you have a similar corner with an offset pin?
Thanks for your help!
User submitted a photo of a screen corner.
Profile picture of Dave
Dave from SWISCO responded:
Yes, I believe that measurement is a typo. Sorry about that! You might need to file down that tilt to fit the window. My real concern is to make sure the corner and the latch measurements will fit into your frame. Unfortunately you have no choice but to improvise on this repair since these parts are not made anymore.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)