In the first and second picture, I need a coil balance shoe that that is 1-1/2" tall, 1-1/4" wide, 1/2" thick. I couldn't find any stamped numbers.
In the Third picture, I need the 3" T Bar Pivot with the exact hole placements. From the bottom to the center of the hole closest to the T-end is 1-5/8"
I also purchased a constant force coil balance (S160-7) and it was too short (31"), do you make a 35" coil with the same weight?
Tom from SWISCO responded:
November 9, 2012
Good afternoon! Thanks for posting. For the pivot shoe and pivot bar, please see our 15-199 and 26-378, respectively. Do these appear to match?
As for the coil spring, we will have these made up in 35" for you. As soon as they become available, we'll let you know, so keep an eye out! Thank you!
Casey from SWISCO responded:
November 16, 2012
Thank you for your patience in this matter! We currently have the the 35" coils of the S160-7 in for you. Let me know if that will help!
A contractor from Chicagoland says:
November 16, 2012
Yes, that will help. I will be making an order on those items on Monday. Thank you.
A contractor from Chicagoland says:
November 29, 2012
Do you have a 3" pivot bar that has the hole orientation as the 26-241 and the "T" end of a 26-378? Or should I just modify (drill) the 26-378?
Paul from SWISCO responded:
November 29, 2012
Thanks for getting back to us. If the 26-378 doesn't work with its holes, you could try using the 26-241 instead. You can also drill the 26-378, just make sure to be careful.
