SWISCO - The Replacement Hardware Authority

Door Roller assembly removal/install

A quick learner from Texas says:
How do I get the old Stanley roller assembly off and install the 23-041? Do I need to bend the bracket? or retainers somehow?

Txs
Profile picture of Paul
Paul from SWISCO responded:
First, lay the door down on a flat, level surface. If it's not screwed on, simply use a pair of needle nose pliers to gently twist the hooks out of the frame. Reverse the process to install.
A quick learner from Texas says:
Are the hooks the ones on the bottom of the assembly, left and right side or top or all 4?
Profile picture of Dave
Dave from SWISCO responded:
There are tabs/hooks and screw holes on all four corners of the roller housing. Whether your roller uses screws or the tabs depends on if the door has cut outs for the tabs/hooks to lock into, or screw holes. The tabs/hooks are on all four corners so that they can be used left or right side of the door. You should be able to see if the top guides have them as well as the bottom rollers.
A quick learner from Texas says:
Txs
A professional from California says:
With most of those you can remove the tabs by inserting a screwdriver up into the rail from the bottom and pressing on the tab to line it up with the slot.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)