SWISCO - The Replacement Hardware Authority

Drawer rollers

A professional from USA says:

I hope you can help. I have fixed drawer rollers (two on the cabinet and two on the rear of the drawer). I need to replace some of them. They appear to be nylon. The OD is 7/8" and the thickness is 1/4". They are riveted in place so I can probably make any ID you have available work. The standoff on the cabinet roller is 1/8" and on the drawer is 1/4". However, I think mainly the cabinet rollers are worn.

Thank you,
Profile picture of Paul
Paul from SWISCO responded:
Could I see a few pictures of the roller in question? That would help us find a good replacement. Thank you!
A professional from Iselin, NJ says:
As requested, here are some pictures of the drawer rollers. We have a good shop on site, so we can modify as needed. As such, I feel the diameter (7/8") and width (1/4") are the most critical dimensions. We will figure out a way to attach them.

User submitted photos of drawer rollers.
Profile picture of Tom
Tom from SWISCO responded:

Well, you could consider our 10-101, which seems to match your dimensions, though I imagine it would require some modification to work for your drawer. You could also look at our selection of side-load drawer tracks and see if anything here could work.

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)