SWISCO - The Replacement Hardware Authority

Exacth width of 84-091 roller

A home owner from Tunnel Hill, Ga says:
I need a screen door roller and your 84-091 appears to be what I need except for one thing. Is the width actually 3/8"? 3/8 of course = .375 and according to my calipers, the one I have is .327 and the slot it fits in is .35. All the other measurements are the same and the picture of the roller is the same. Could this actually be a little under 3/8?


Thank you kindly for any help you can give.

Profile picture of Mike
Mike from SWISCO responded:
The width of the housing on the 84-091 Screen Door Roller actually measures on the larger side of 3/8", at approximately .381.
A home owner from Tunnel Hill, Ga says:
In that case,is there one of this configuration that is on the thinner side?
Profile picture of Mike
Mike from SWISCO responded:
Unfortunately I do not see anything in our stock that measures on the thinner side of 3/8".
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)