SWISCO - The Replacement Hardware Authority

Sliding door roller 1-1/2" replacement

A home owner from Fort Myers Florida says:
Hello,

Can you get the attached sliding door roller assembly? If yes, how much?

John
A customer submitted photo of a door roller.
Profile picture of Tom
Tom from SWISCO responded:
Thanks for posting, John.

Unfortunately, it appears as though your sample is only of the inside portion of the roller assembly. We would need to see the outer portion as well in order to identify an applicable replacement. It should still be installed in your door. Please see if you can remove it and upload a picture for us to see.
A quick learner from Fort Myers Florida says:
See attached.... good catch...
A customer submitted photo of a door roller.
Profile picture of Paul
Paul from SWISCO responded:
Thank you for your help! This roller looks very similar to our 81-020 Sliding Door Roller with a Concave BB Wheel. Please take a look at that and compare it to your own.
A quick learner from Fort Myers Florida says:
It looks closer to the 81-010, the dimple on my unit is 1 " from the top, the length is 2 and 3/16. Can you check the dimple before I place the order?
Profile picture of Paul
Paul from SWISCO responded:
The 81-020's length is also 2-3/16", and its width--including the flares--is 14/16".

The width of the 81-010--including the flares--is just about 13/16", however its height is 1 3/8", rather than 1 1/2" like your sample.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)