SWISCO - The Replacement Hardware Authority

Part for a Stanley Mirror Closet Sliding door hardware

A home owner from Pennsylvania says:
I need four plastic parts like in the picture which covers the wheel in the other pictures.
User submitted photos of mirror door hardware.
Safety Mirror, STANLEY / MONARCH 4011 U.S. PAT 3,058,173, PAT CAN 1963, 64564-00
Profile picture of Paul
Paul from SWISCO responded:
Check out our 23-041 and see how well this matches your hardware.
A home owner from New Mexico says:
I am in need of the clips as well. The actual roller assembly p-n: 23-041 appears to be a direct replacement for the stanley roller. Is there a replacement guide clip available? Are they included with the above mentioned replacement roller assembly?
Profile picture of Tom
Tom from SWISCO responded:
I'm afraid we do not carry the clip, but a while ago we learned that it's actually not necessary for the roller to function. Assuming the dimensions match up, our 23-041 should work just as well without it.
A professional from California says:
The clip is meant to lock the roller down to the track so that it cannot be knocked out of place.
They tend to work great if your track is clean and straight.
They sometimes drag, catch on junk in the track, and break easily.
The door will work fine without them. They just go off track easier.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)