SWISCO - The Replacement Hardware Authority

Patio door handle

A home owner from USA says:
I need to replace a patio door locking handle with 3 7/8
User submitted photos of a patio door handle.
Profile picture of Dave
Dave from SWISCO responded:
I'm not familiar with this handle set. If you can, please send us some photos of how it locks and also a photo of the locking mechanism itself. That would be a huge help. Thanks!
A home owner from USA says:
Tom, Here is some additional information that might help. Attached are pictures of the handle we are trying to find a replacement for. The handle is a surface mounted with a single downward hook on the right side of the patio door.

The locking mechanism that mounts on to the door is ½ inch thick and the screw holes are 3 3/7 inches apart. (Worst case scenario is to drill out the holes in the door to accept a 3 15/16 inch handle.)

Any help would be appreciated.

Thanks,
Russ
User submitted a photo of patio door hardware.
Profile picture of Dave
Dave from SWISCO responded:
Look at our 82-224 patio handle. It seems to have the same hole centers and it locks in the downward position. We also have the opposite side, our 82-257. Take a look and see what you think.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)