SWISCO - The Replacement Hardware Authority

Pella Select Storm Door Top Controll

A home owner from Buffalo says:
We need a new top controller for our Pella select storm door. The canister is 10 3/4" from the 2 brown ends. The canister looks like its 1 1/2" in diameter.

The brackets attached to the door are fine, we only need the canister with the 2 pegs on it. The bar coming out of the canister from the right is 2" long.
User submitted image of their door hardware.
Profile picture of Dave
Dave from SWISCO responded:
We carry the 40-154, which might work for you, however looking at your photo it seems your closer could be automatic type. Can you confirm? The 40-154 is held open with the a washer, instead. Take a look and see if the dimensions match up to yours and if this is the type of closer you want.
A home owner from Buffalo says:
The bottom closer on the door has the automatic closer on, not the top one that we are looking to replace. The dimensions of the closer you recommended aren't the same for what we need.
Profile picture of Dave
Dave from SWISCO responded:
Thanks for your patience. The dimensions of the 40-154 has that same 1-1/2" diameter as yours. I measured the front end were the two drop pin holes are to the end of the canister tube. That came to 11-5/8". The canister tube itself is only 10-3/4" long. See if that matches your dimensions. Worst case scenario is that you might have to reset the mounting bracket on the door to make up for the difference in length. Also be sure to see the video on installing the drop pin type closer on the right side of this page.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)