SWISCO - The Replacement Hardware Authority

Pella storm door with roll down screen needs handle assembly

A home owner from West Des Moines iowa says:
The only marking on the back side of the handle is at thetop 05.05 under that is M in the middle between the two screw holes is 1. The last picture are of the holes on the door. The ones for the screws measure app. 3/4 " the two larger measure 3/4 " distance from the top of top hole to bottom of bottom hole is app. 5 1/2" distance from top of first screw hole to bottom of next screw hole is app. 1 3/4 "
User submitted photos of storm door hardware.
Profile picture of Dave
Dave from SWISCO responded:
I'm afraid we don't have this exact lock set. However, we do carry a few possible substitutes. Check out our 40-160 and 40-058. Carefully compare their dimensions to your own hardware and see how they match. We also carry inside replacement latches. Take a look at our 40-150 and 40-145 and see what you think. If you're just replacing the inside latch, you might need some shims to build it up. See our 40-179.
A home owner from Louisville, Ky says:
This is for the original poster. What option did you go with and did it work? I contacted pella and the replacement part is almost 70.00.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)