SWISCO - The Replacement Hardware Authority

Replacement rollers for a pocket door with a wood track

A quick learner from Pomona calif says:
I have a pocket door with a wood track. The track has a 3/8th cut out. The wood track width is 1 1/2 in. With the 3/8th cut out and the top track is 1/2 in. Thick. The roller would need to fit on top of the wood track with a bolt drop down through the cut out and connect to the top of door brack. My problem is finding the right roller that is easily fit up into and onto the wood track. Hope my pictures help. Thanks in advance for any information
User submitted photos of pocket door hardware.
Profile picture of Paul
Paul from SWISCO responded:
Thanks for posting. There are a couple of possibilities. I don't know if you have the room for these, but see our 23-255 with a width of 1-1/2" and roller size of 1"; or maybe our 23-193, with a width of 1-1/8" and roller size of 7/8".
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)