SWISCO - The Replacement Hardware Authority

Screen door roller

A home owner from Hawaii says:
No markings.
User submitted a photo of a screen door roller.
A home owner from Hawaii says:
OP here. Forgot to add. I have a 1/2 dozen sliding screen doors using these rollers. They are corner mounts--the nylon extension slides up in the corner and is secured by a single screw--but the local stores do not sell them and I cannot find a match anywhere on-line. Any help would be appreciated.
Profile picture of Dave
Dave from SWISCO responded:
Thanks for posting! This looks very similar to our 84-007. Check it out and see if you agree. If not, could there be more to this roller housing still inside the door?
A home owner from Hawaii says:
Thanks for the reply.
There are no more parts in the door. I have the same roller as the one in this post.
http://www.swisco.com/discussions/patio-screen-door-rollers-77-26695

The part you reference *might* work, if the metal part flips to vertical. Does the unit form a "L" shape when assembled?
Profile picture of Dave
Dave from SWISCO responded:
Yes, the 84-007 does make an "L" shape when installed.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)