SWISCO - The Replacement Hardware Authority

Superseal Window Tilt Latch Replacement

A home owner from New Jersey says:
I'm in need of a replacement Superseal Window Tilt Latches. I've searched your site but am unable to identify the part needed.
Overall Length: 2 7/8in
Distance between screws: 2 1/8in
Distance from the outside screw to the window: 1/2in

Part 26-120 is the closest I could find but isn't the part needed primarily due to the distance from the outside screw to the window being 3/4in.

I've included a drawing of my latch measurements

Thank you.
A user submited photo of window tilt latches
Profile picture of Paul
Paul from SWISCO responded:
Thanks for posting! Based on your illustration, the style appears to be similar to our 26-195 tilt latch. Do you think that might work? If you aren't sure, could we see a picture of the latch itself?
A home owner from New Jersey says:
The part looks very similar. Do you have the distance from the outside screw to the edge? If it is a 1/2in, as in my drawing, this is most likely the part needed.
I've attached a picture of one of my working latches for your review.
A customer submitted photo of a tilt latch.
Profile picture of Paul
Paul from SWISCO responded:
From the center of the 26-195 tilt latch's screw hole to the edge of the latch, I have a measurement of approximately 1/2", yes.
A home owner from New Jersey says:
Excellent this appears to be the part needed - Thanks for you help!
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)