SWISCO - The Replacement Hardware Authority

Tips on getting old rollers out

A quick learner from Johns Creek Ga says:
I need 4 rollers, #84-046 when they are back in stock. Do you have any handy tips for getting the old ones out ?
Profile picture of Dave
Dave from SWISCO responded:
Sure! This roller is held into the door by the two screws at the bottom. Take the screen door off of the track, remove the two screws and you should be able to pull the wheel out of the cut out in the door.
A professional from California says:
The adjustment screw goes through the spline channel. Sometimes it helps if you push the screw from the top and wiggle it past the spline. Or pull the spline away from it.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)