SWISCO - The Replacement Hardware Authority

Traco Face-mount Keeper

A quick learner from Maryland says:
I have what I believe to be Traco hardware in my windows. Pulling the left side tilt latch reveals "Pat #5.139.291" which I traced on your site to
Product Code: 26-263 Top Tilt Latch, Left Hand.

My front window haa a slightly bowed sill that leaves a 1/8 inch gap when the window is fully closed. The window seals well. My question is: is there a taller face-mount keeper that I can get to be able to lock the window. Currently the sweep lock sits above the keeper rail.

User submitted photos of window hardware.
Profile picture of Paul
Paul from SWISCO responded:
Thanks for posting. I recommend that you remove your keeper and compare it to our 90-257 and see if this is taller.
A professional from California says:
You may want to check that the upper panel is up as high as it can go.
There are three possibilities. The top isn't high enough, the bottom isn't low enough, or the window was miss-measured or warped.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)