SWISCO - The Replacement Hardware Authority

Unknown brand window lock, any ideas?

A quick learner from Palm Coast, Fl says:
I cannot find any numbers or names on the windows or locks. Overall length of the lock is 2 3/4 inch. Holes are 2 1/2 inches center to center.. Receiver is 1 1/2 inches long and holes are 1 inch center to center
User submitted a photo of a window lock.
Profile picture of Tom
Tom from SWISCO responded:
Can you confirm the distance between the installation holes, center-to-center? We don't have any lock in this style with a 2-1/2" spacing. Our 90-266 appears similar, but this has a spacing of 2-1/16". Can you also confirm the hole offset? That would be the distance between a screw hole center to the glass-side edge of the lock. The 90-266 has a backset of 11/16".

You may also want to look at our 90-246 and 90-274, which have a spacing of 2-1/8" and 2-1/4" and an offset of 3/4" and 11/16", respectively. Double check your measurements and see if any of these could possibly work.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)