SWISCO - The Replacement Hardware Authority

Window glazing gasket

A home owner from Frt Myers Fl says:
The home was built in 1989, there are no markings on window frame to indicate who manufactured them.

User submitted photos of a glazing bead.
Profile picture of Dave
Dave from SWISCO responded:
Two types of glazing come to mind. See our 55-164 and 55-192 and see if either of these could fit your window.
A home owner from Fort Myers Fl says:
Dave,

Just to verify that your recommendations could fit my window frame,I took some additional photos in an attempt to provide a clearer view of the true measurements.

the width of the inside groove of the bottom of the bean is 3/32

The depth on the groove is 1/16

The width of the bead is 1/2


I've also attached a photo of the bead within window frame.

please review and advise.

Thank you in advance,
Gary
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)