SWISCO - The Replacement Hardware Authority

Wondering about the notch on the back of 32-116

A home owner from Texas says:
As you can see, my bracket doesn't have that extra notch in the back. I am worried that the notch on your 32-116 will be in the way when I try to screw it on. Take a look at my last picture. My bracket will be screwed onto this piece of wood which is about 2 & 3/4" wide. If the back notch on 32-116 is not at least that far down on the bracket won't it be in the way and prevent me from screwing the bracket on properly?
User submitted photos of drawer hardware.
Profile picture of Dave
Dave from SWISCO responded:
Yes, I see what you mean. Your part has a flush back. I'm afraid we don't have a version of the 32-116 that works the same way. You could still use it, but you will need to remove the "bumps" on the 32-116 so that it can lay flush against the back of the cabinet.
A home owner from Texas says:
How would I remove it? Could I possibly cut through it? Do you think 32-025 or 32-094 would work instead.
Profile picture of Paul
Paul from SWISCO responded:
The bumps on the 32-116 can be cut off or even just filed down.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)