Viewing all customer Discussions for:

Door & Window

I am missing a crank handle like the one in the attached photo. The one sitting next to it is the wrong type I ordered from you. Do you have the correct type in the correct color? Thanks!

Looks like a Pro 200 single hung window

I need help finding 4 balances that different than the rest of the house. These balances are etched, 33 3 Caldwell AM The metal channel is 34 inches. All the other windows are 395 balancesPictures attached. The black plastic end is different. Thank you

Looking for replacement

This will open window but not crank it closed. We have ordered from hardware store before but no identifying numbers on bill.

1" Rollers

I need replacement pins, which part would I need? The pins it has now are 5 1/4 in long and 5/16 in diameter. Also if I decided I wanted to replace the tracks which type would I need for the top and bottom?

HOPING YOU CAN IDENTIFY THIS TILT PIN OR ONE THAT WILL WORK.

Hi, all I know is that it has 2 coils and there's letters A-F. The top one has D in the upper right and the bottom has H in the upper right. Let me know if I need to completely unscrew and remove it. Thanks!

Hi, I would like to identify the PN for the attached window balance. It shows "14 5 ew cmc 10". it is for a non-tilt window Thanks,

The sliders are old but in very good condition so I'm hoping to find this replacement part. The inner handle is fine, I just need the part in the photo.

I need balancers for both sides of this Milgard Classic single hung. 26 4 AW CMC 7

Alliance Windgate Belmont double hung window broken pivot window shoe I need to replace the balance and shoe

30" length(metal only) and 1/2" wide left side channel balance marking is 29-4 BA CMC 11 right side channel balance marking is 29-4 AA CMC 11

Per the associate I am working with, she said the blue end attachment is signs this is a custom.

These came out of an Alliance window and I need both L&R. The only marking I can find on the whole balance is the leter P. I also need the little part that screws into the bottom of the window that sits into the balance and the 'stud' has broken off. I uploaded some measurements for that piec ... (cont.)

Please see pictures attached. Do you have these metal spring clips to hold window balance in jambs

1st picture-shows window label 2nd pic-pivot shoe or lock (not sure the correct terminology) Also need the coil springs that run from center sash side to bottom dash side. Need internal tilt latches R & L

Half inch wide with the markings 16 2

Not sure of the brand of the windows. Located in Michigan and 22 years old. We have 5 total with 4 acting up