Good morning Swisco.
I have need of 4 window balances and have no ID on the old ones.
They are 26 and ½ inch long ( Metal only ) The clip on the window is in the middle and not on top. The sash weighs 9.5 pounds.
The pictures will tell you the top and bottom pieces.
Please let me know if you can accommodate me with replacements.
Also the sashes have a small plastic gliding trim and also would like this too. It is 3/8 inches wide and a wrap around piece for the aluminum sash with about 1/16" opening channel.
Tom from SWISCO responded:
January 27, 2020
Thank you for your patience in this matter. I'm very confident that we can replace this hardware, we just need a little time to confirm a few details. The fact that your balance is 26-1/2" long means it will have to be a custom order. Otherwise, it looks very similar to our Series 370. Once we have confirmed its availability, we can get to work on setting you up with an order link and price quote. In the meantime, can you tell me how many you need? As for the glazing, I'm less certain about this. It's similar to our 55-034 I recommend comparing your dimensions to ours to see how well they match up. Let me know! |
Tom from SWISCO responded:
January 28, 2020
I would recommend against using a standard size balance. I've tried it myself in the past and I've rarely had any success, and when I did it was a fluke. We usually always recommend sticking with what you have now. If it's worked up to this point then there's no reason to mess with success. I'll email you an order link and price quote for 4 of these. You can then decide from there which route to take. We also do not sell any type of friction control strip, unfortunately. That may be something you have to contact the original supplier for. I'm sorry we can't offer anything at this time. |