Hi,
I'm trying to find a set of replacement rollers referenced in the subject line. The house was built in 1957, and the doors may be original to that year. They are just a friction fit in each end of the frame with a height adjustment screw positiooned vertically from the bottom.
I've attached a few pictures of one of the roller assemblies.
The dimensions are as follows:
Roller diam. = 1-1/4"
Roller Width = 5/16"
Frame Lsngth = 2-3/32"
Frame Height (Rt) = 1-5/16"
Frame Height (Lt) = 1-1/2"
Frame Width = 1/2"
Frame Flare Wiidth (each end) = 19/32"
Thanks for your help.
Gary
|
Dave Sr. from SWISCO responded:
February 21, 2024
Hi there Gary. Thank you for reaching out to us. We don't sell this roller and I'm sorry to say that I couldn't locate it through any of our suppliers. However, ADOR did use a roller similar to the 81-243 with the adjustment screw out the back of the housing. Do you think you could adapt this roller to your door? Have a look at the specifications and see what you think. If not, I recommend you see if you can replace just the wheel with our 81-266 kit. This might be a good solution if the roller housing is in working order. 
Alternate image for 81-243
|
![How to Replace a Patio Sliding Glass Door Roller [1080p]](../../images/videoThumbnails/81.jpg)
