Tom from SWISCO responded:
April 5, 2019
Can you send us pictures of the part removed from the window? This will allow our parts experts to better recommend replacement options for you. |
Tom from SWISCO responded:
April 8, 2019
Going through our archives, we believe you have the old Cavco aluminum tilt window. I'm afraid that they went out of business in the last century and very few parts remain in circulation. For instance, the lock and top tilt latches are no longer available. I don't know anyone who may still have these. You might be able to replace the top tilt latches with a surface mount like our 26-193 and 26-194. This would require drilling new holes. As for the balance, we can replace it but it would have to be a special order. We'd be using our Series 600 with a 15-035 attached. Does that look good to you? If so, let me know the length of the outer tube and the weight of the sash. Do your best to weigh it; you may not be able to remove the sash from the window, so if that's the case just put a scale on the sill and gently lower the sash onto it. It won't be perfect but it'll do for our purposes. Finally, let me know how many balances you need. Once I know that, we'll email you an order link and price quote for the desired quantity. |
Tom from SWISCO responded:
April 9, 2019
|
Hey Tom, I weighed the sash I'm olace it's about 10 lbs by scale but may could be 12lbs. My balance is 28" long and the tube itself looks to be 3/8" inch in diameter. If you think these will work I can do the fitting of the parts. The tilt latches you recommend are cool also. I can make those work. I know I need two balances, and let's do 6 slide tilt latches.
Thanks