Hi
These are pics of my balance for a non-tilt Peachtree 34" wide by 29" sash. The balance itself is 26 1/4"" length by 5/8" wide and deep. The sash weighs 21 lbs.
The balance is mounted by a single screw into the sash frame on one end and
slipped into a slot in the sash frame on the opposite end. There is no markings or
code numbers on the balances.
Appears to be a Series 745 25.25-4.
Cost = $14.97 + $2.10 each.
My nylon plug shank is 1" Length x 5/16" dia. and mounted into a hole in the window
frame and secured with a wood screw.
I have more pics if needed.
Please verify my selection especially the fit of the nylon plug.
I'll need 5 balances.
-Thanks
-Norm
|
Paul from SWISCO responded:
September 24, 2020
Many thanks for your correspondence. This Peachtree balance with the 16-027 terminal plug has been shortened to 7/8". The diameter is 5/16", so I am confident that it fit in your frame hole regardless. I see that you selected the S745-26 with a stamp option of 25-4, which is for a sash weighing between 20-25 lbs, so you should be fine. |
