Roller Slide Bracket For Kitchen Cabinet Drawer

Thanks for posting. See our 32-061 21-5/8" long drawer slides, as well as the 32-119 Track brackets. See if you could adapt this setup to your drawer. Note that these replacements sockets must be mounted with screws to the back of the cabinet. Let me know what you think. 

I think it will, yes. Your original bracket is the old Merillat brand drawer socket, which is no longer made. However I've personally used the 32-119 to replace it many times in the past and it has a high success rate. As long as the opening that takes the track is the same size as ours then it should work perfectly well.

Detail of 32-119

Sure, I like to use the 33-088, but keep in mind that the 5/8" length may not be ideal for the back wall of your cabinet. You might have to gauge that for yourself to make sure you have something that works adequately with the cabinet itself. Otherwise the #6 gauge should be fine.