Photos showing single roller was removed from one of the sliding glass door pane approx. 10 years ago.
Photos showing tandem rollers was the rollers used to replace the single roller.
The part shows DISCO 2136-1. There are approx. 24 door panes in need of replacement. They range from 5'x 8' to 3'x 6'8" each.
I am an architect and homeowner. I will have an experienced handyman replace the rollers. Thank you.
Casey from SWISCO responded:
August 17, 2022
Hello, Your original single-wheel roller assembly resembles the 81-132. If this was the roller that all of your doors used originally, I would recommend using the more direct replacement instead of switching to a tandem roller. Take a look and see how the dimensions on our product page compare to your original roller to confirm if this is the correct part for your repair. Thank you! |
Casey from SWISCO responded:
August 25, 2022
Thank you for your patience as we looked into this for you. We do not currently carry a match for your tandem roller in our inventory but we have found a similar assembly that you may be able to use. To confirm, we would need you to write out the exact height and width of your roller housing, as well as the diameter of the wheel. Thank you. |
Casey from SWISCO responded:
August 25, 2022
Exactly. |