removed defective part by prying channels apart with flat "L" pry bar. Do I need to use the same procedure to replace the new part (15-173)?
3 Replies
How do I remove the plastic pivot shoe from an aluminum window? Do I just cut it or force it out with a screwdriver? If I do manage to get it out how do I replace it with the new part? Does it snaps back in?
On the aluminum window, first check to see that if there is a cut-out to remove the old shoe. Look behind the sash stops, you will find the sash stops in the top of the inside track for the bottom sash and the bottom of the outside track for the top sash. If there are no cut-outs you will have to make one. Possibly use a type of metal snips or a 'Dremel type tool' to cut the track. However, be careful not to cut too much of the track. Cut just enough to remove the old shoe and no longer than the sash stop so the cut-out will not interfere with the operation of the window. That way when you reinstall the sash stops, you will cover up the cut-outs. Take your time not to damage the window or hurt yourself in the process. Possibly get someone familiar with window repair work to do the job for you.