Dave Sr. from SWISCO responded:
March 16, 2016
Hey, Bryan. If possible, I would like for you to give us the dimensions of your roller housing. In the meantime, take a look at our 81-024 roller and see if these match up to your sample. The 81-024 has the adjustment screw in the middle at the back of the housing, while your adjustment screw is at the bottom. If the dimensions are the same as your sample you would need to switch holes in the glass door rail, using the adjustment hole for the frame screw and the frame screw hole for the adjustment screw.
|
Dave Sr. from SWISCO responded:
March 18, 2016
Ah, I'm glad you confirmed dimensions. first thought of the 81-024 roller, but you say your height is 1-1/2", while the 81-024 housing is only 1-3/16" tall. It might not matter, but I'm not sure. Another suggestion is to just replace the wheel itself. Look at roller kits like our 81-266 and 81-272. See if either of these can work for your door.
|