Casey from SWISCO responded:
March 6, 2024
Hello, You have an old Wright operator, which used a basic operator body and gear arm with different-sized link arms attached. If this wasn't difficult to keep up with by itself, they also happened to go out of business. With that being said, we do have a few options you could try. I would recommend starting by looking over our 39-015 and 39-316 operators, which have 5" link arms. Note that they do not come with the 39-105 detach clip, which you would need to order separately. These operators are used with the standard 39-114L or folding 39-205 handles. Alternate image for 39-315
The link arm may be a bit shorter than yours but you can do two things to make up for that. First, you could try moving over the sash bracket on the window so that it meets the link arm in the correct position. You could also take the link arm off of your original operators and install it on the replacements using the 62-014. As for your hinges, take a look at the 36-048 set with a 10" base. See the installation video below. Your sash lock resembles the 38-090. We'll include the hole spacing from our product page below to confirm it matches up to yours. Review the parts we've discussed and let us know if you have any other questions. Locked front view of 38-90
Unlocked rear view of 38-090
|