SWISCO - The Replacement Hardware Authority

double hook mortise 82-238

A home owner from QUEBEC CANADA says:
The piece replace real mortise 2-hook made in NEW ZEALAND. I am a multipoint door latch with mortise up and down and double hook at the middle, the two mortise up and down to joint by bar (plate) I want to know the distance between the fix point the mortise hook with bar and anchor the mortise. It is 9/16" inch. Thanks
A customer submitted photo of a lock and keeper.
Profile picture of Tom
Tom from SWISCO responded:
Thank you for posting. Unfortunately, I'm not exactly sure what measurement you need here. Could you please be more specific? If you wish, can you upload a close up view of the measurement you need? I apologize for the inconvenience.
A home owner says:
remove the face plate from mortise assembly and look at the cursor it move .the distance between the cursor and the center of the hole when the hook is open
Profile picture of Tom
Tom from SWISCO responded:
Thank you for the clarification. The distance between the "cursor" and the top most screw hole of the mortise lock, while the hooks are extended, is 9/16", yes.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)