SWISCO - The Replacement Hardware Authority

hole spacing

A quick learner says:
Are the 84-066 mounting holes spaced 2 1/16" on center? With an adjustment hole centered at 1 1/4" ? THANKS
Profile picture of Paul Sr.
Paul Sr. from SWISCO responded:
The actual hole spacing of the 84-066 screen door roller is a little different from your measurements. Double check your measurements to see if they do match. There is a distance of 2-3/32" between the two mounting holes. The adjustment hole is not exactly centered. There is distance of 1-7/32" from the adjustment hole to one side of the roller and a distance of 1-5/16" to the other side of the roller (see attached picture). Also, take a look at a similar roller Swisco part 84-074.
View of the top of the 84-066 patio door roller.
A quick learner says:
Thanks Paul. My hole spacing is 1/32" shorter, at 2 1/16" apart, but I think these will work fine. Thanks again.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)