SWISCO - The Replacement Hardware Authority

mirror door roller assembly

A home owner from santa monica ca says:
Can you match this roller assembly? I have no numbers, but when I bought the doors,the number 400000623726/0002 was on the receipt.

I need proper rollers since the plastic wheels are flattening. I've had them since 1989. Do you have replacements? I need 8 of them for two sets of mirror closet doors.

Thanks for a reply.
User submitted a photo of mirror door hardware.
Profile picture of Dave
Dave from SWISCO responded:
Thanks for posting. Are the wheels concave, or convex? It looks like they might be concave. If so, take a look at our 23-064 and carefully compare its dimensions to what you have. Let me know if they line up. If not, let me know where they differ.
A home owner from santa monica ca says:
Thanks for the suggestion. My roller seems to look more like 23-028, not 23-064. Mine don't have the reindeer flanges on the sides. Would 028 fit the doors if the wheels are concave and measure 1 1/2" diam?
From the top of the screw flange to the bottom flange I measure 3". Left to right flanges, 2 1/2". The body is 1 7/8" It has a bottom frame support underneath and a similar support on each end. Is this a close enough match?
Thanks.
MG
Profile picture of Tom
Tom from SWISCO responded:
I agree, I think our 23-028 also looks like a pretty good match, as well. As long as the dimensions seem to line up, and as long as the wheel is the same. Those are the most important things to consider.
A quick learner from santa monica ca says:
Thanks, I will order them soon.
Very nicely designed website and quick response!
MG
Profile picture of Tom
Tom from SWISCO responded:
Thank you! Let us know how it works out.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)