SWISCO - The Replacement Hardware Authority

need lock set for patio door

A quick learner from Albany, NY says:
My door is manufactured by Kasson and Keller of Fonda NY.
It has 1 1/2" wide door rails and the handle's mountig screws are 4" apart.
The lock the company sent me would not fit inside the existing handle as molding inside the handle prevented the lock from nesting flush with the hole
in the handle.
Thank you
Profile picture of Tom
Tom from SWISCO responded:
Can I see a few pictures of the original lock that installed in your door? That will help us find a possible match.
A quick learner from Albany, NY says:
sure. Here are three photos of the Ecoshield 3200 series patio door DDSG-KKI-K-23 latch assembly.
Thanks!
User submitted a photo of a patio door handle.
Profile picture of Dave
Dave from SWISCO responded:
I'm sorry, just seeing the outside pull is not enough. We will need to see both sides of the handle removed from the door in order to identify what you need. If you just need a key cylinder, you could consider our 82-310 but I am not sure if that will work or not.
A professional from California says:
Sometimes the problem is that the hole is not a full 5/8". Check for that. Most pulls should fit a standard key cylinder. If that is not the problem, 82-306 should work. Does Swisco have a white version like 82-306?
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)