SWISCO - The Replacement Hardware Authority

replacement bracket - drawer rail/slide/guide

A home owner from Houston, Texas says:
Bracket which attaches to rear of cabinet and supports end of drawer rail or slide or guide has cracked. Rail is marked with large G and asterisk, and smaller RC. Do you have replacement part?

User submitted photo of drawer rail and bracket guide.
Profile picture of Mike
Mike from SWISCO responded:
Thanks for posting, Steven. Take a look at the 32-116 Hanging Slider Socket. Be sure to compare the measurements of your original before considering the 32-116 as a replacement.
A quick learner from Lake Mary, Florida says:
I have what appears to be the exact same bracket and drawer rail as pictured above. The bracket is 4 3/8 inches long. The 32-116 is longer than the original. Has the 32-116 worked for your customers looking for a replacement for the original that is 4 3/8 inches long?
A quick learner says:
The replacement part *is* a little longer -- I had to use new holes in the rear of the cabinet to mount it so that the guide stayed level, and reaching the rear of the cabinet with the drill to start the holes was a challenge. But it was much better than having a broken drawer!

Good luck,
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)