SWISCO - The Replacement Hardware Authority

replacement lock/handle

A home owner from Monroeville PA 15146 says:
I need to replace the lock/handle on my door. The distance between the screw holes to the center where the handle was located is:
Screw on the top to the center hole: 1" 1/4
Screw on bottom to the center hole: 2" 3/4

Information on the window itself: PPG Herculite K
Tempered safety Glass
SGCC: 1603
ANSI: Z-97-1984
16CFR1201CCCH121M

Thank you
Maria
User submitted a photo of their patio glass doo handler.
Profile picture of Tom
Tom from SWISCO responded:
Thanks for posting, Maria. I recommend either our 82-073 or 82-074, depending on the thickness of your door.

For future reference, the appropriate way to measure the screw holes is by measuring the distance between them. You can ignore the center hole in many cases. For example, the two handle sets above that I suggested each have a hole spacing of 3-15/16".
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)