SWISCO - The Replacement Hardware Authority

Surface tilt latch replacement 2-1/2" screw centers

A home owner from Hamilton, ON, Canada says:
Have to replace a few tilt latches -- dimensions 2-1/2" (centre) by 3-1/4" long by 1-1/4 wide. I have attached a photo. Which one would apply? I looked at 26-093 but it didn't seen exact.

Thanks very much.
A customer submitted photo of a window latch.
Profile picture of Paul
Paul from SWISCO responded:
Thanks for posting! Can you please confirm the distance between your installation hole centers? Our 26-121 and 26-120 latches may be possible replacements for your own hardware, but they measure 2-1/8".
A home owner from Hamilton, ON, Canada says:
Installation hole centres is 2 1/2". The area from the right hand (or left hand) screw to the edge is 3/4" from centre of screw to the edge.

I really appreciate your input.
Profile picture of Paul
Paul from SWISCO responded:
In that case, take a look at our 26-092 and 26-093 tilt latches, whose installation holes measure 2-1/2" apart and whose casings are 1-5/16" wide. Do you think these might be better?
A home owner from Hamilton, ON, Canada says:
Thanks so much. Yes, these are perfect.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)