SWISCO - The Replacement Hardware Authority

window casement track

A contractor from tacoma wa. says:
Want track shown that connects to operators 39-091 & 39-092.

attached is the image. I spoke with Tim earlier this morning.

Charley
User submitted a photo of a window operator.
A contractor from tacoma wa. says:
want to replace the levers too

attached are images... there appears to be 2 that match however the mm are different..

do not know the mm, are these universal or called out left and right with the part number
User submitted photos of window hardware.
Profile picture of Dave
Dave from SWISCO responded:
Thanks for posting! For the hinge, check our our 36-031 and see if this is a good match. You may also be interested in our 39-522 connecting operator arm.

As for the locks, though, we will not be able to say what a good match is without knowing the mm. They are not universal. Let me know!
A quick learner from tacoma wa. says:
is the mm the opening of the fingers that enclose the post on the vertical track?
Profile picture of Tom
Tom from SWISCO responded:
It's the length of the fork, basically. You can see the difference between the 38-138 29mm and 38-139 37mm more easily when you compare them side by side.

38-138


38-139


You'll find it easier to measure if you were to fully remove the lock from the window.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)