SWISCO - The Replacement Hardware Authority

How to use the 40-402 Out-swing Partition Latch Repair Kit

Installation Instructions
  1. Fit 'Cover Plate' to edge of door and center over existing 'concealed latch' hole.
  2. Press firmly to door edge.
  3. Using a 1/4" drill bit, drill (4) holes through the door, using holes in cover plate as a template.
  4. Secure 'cover plate' to door with the included (2) 5/8" barrel nuts and (2) #10-24 x 15/16" shoulder screws.
  5. Mount latch to door with the included (2) 1/2" un-slotted barrel nuts and (2) #8-32 x 1 1/8" machine screws. When installing the outside pull, it will require the use of the included (2) #8-32 x 1 3/8" machine screws and no barrel nuts.
  6. Locate strike/keeper and mark the installation holes.
  7. Drill through pilaster using a 1/4" drill bit. Secure strike and keeper using the included (2) 5/8" barrel nuts and (2) #10-24 x 1 3/16" shoulder screws.
Discussions that mention this guide
Discussion # Of Replies Last Post Date
no discussions have been started yet
Have a question about this guide?
Use this form to ask questions or to share your experiences regarding this guide. Every discussion will be reviewed and answered by our experts.
(your email address will be kept private and is only used to inform you when a response has been made)