40-006 In-swinging Door Bracket Installation

This installation guide explains how to install the SWISCO in-swinging door bracket 40-006.

Step 1

Install the in-swinging door bracket at the upper edge of the door as shown in the image. Note the 2" distance from the edge of the door.

Step 2

Hook the closer rod onto the bracket. Hold the closer tube level and install the screws in the bracket at the end of the tube. Note - be sure the 'hold open washer' is ahead of the lugs on the rod as shown.

Step 3

Insert the X-washer into the groove in the door bracket pin. Open the door slightly and move the 'Hold Open Washer' behind the lugs on the rod.

Step 4

Adjust the control screw at the end of the tube for desired closing speed.

Related Item(s)

Inswing Storm Door Bracket

40-006