This installation guide explains how to install the SWISCO 40-006 In-Swinging Door Bracket.

Step 1
Install the in-swinging door bracket at the upper edge of the door, 2” from the hinge jamb, as shown in the image below.

Step 2
Hook the closer rod onto the bracket. Hold the closer tube level and install the screws in the bracket at the end of the tube.

Note – be sure the ‘hold open washer’ is ahead of the lugs on the rod as shown.

Step 3
With the connecting pin, attach the door bracket to the front hole of the closer tube. Open the door slightly and move the ‘hold open washer’ behind the lugs on the rod.

Step 4
Adjust the control screw at the end of the tube for the desired closing speed.

For additional instruction on installing the 40-006, feel free to submit a question to our team of experts.