Broken Pella Storm Door Latch

Question

Hello we have a Pella Storm door with a latch and a lock on the inside of the door(see photos, Door 1-5). The latch broke and we need the replacement latch.
These are approximate measurements:
The latch is 2 & 1/2 inches long and 1 and 1/4 inch wide. The screw holes are 1 and 7/8 inches apart. The center hole that holds the shank is 5/16 of an inch. The Shank that fits in the center hole of the latch and goes though to the outside handle is 2 & 7/8 inches long. See the photos that show the latch, the latch hole and the shank. (Door 1) We ordered from you the wrong part (SK357W). It looks like the right one but the shank hole is way to small. We will be sending the SK357W part back. We hope that you have the part that we need. The measurements are approximate and very close to accurate for an amateur In love

Thanks for your help
Please let us know if you got the pictures

Tom · Accepted Answer

I believe you can use our 40-150 as a replacement for the inside handle. One main difference is that ours is a turn lever, while yours is a push lever. Otherwise, I think it could still work. Look it over and see what you think.