Gorell awning type window part
A handy person from ohio says:
February 22, 2011
As you can see from the picture, there are 2 plastic pieces covering the metal slides on either side of the window, the ones with the 2 screws in them-the bottom 2 are broken-look the same as the top ones. It is on a Gorell 150498 001 001. Might you have any of those? Gorell makes you jump through hoops, and find a dealer to get them. Thanks. Joe A.


![]() |
Donna from SWISCO responded:
February 25, 2011
Hi Joe,
Thanks for posting an image of the product you are searching for. I believe we have the needed replacement hardware, see SWISCO product code 39-265, Lock Bar Guide, and compare the measurements to one you are trying to replace. |
A quick learner from Ohio says:
February 25, 2011
It looks similar, however, the total length of mine is 3 3/8", and 3" from center of one screw hole to another. It is 1" wide, and about 5/16" deep. hope this helps! Joe


![]() |
Mike from SWISCO responded:
March 9, 2011
Thank you for submitting your photos.
We have updated our measurements for the 39-265 Lock Bar Guide. We recommend you take another look at our dimensions, and also double check your guide's dimensions, specifically the width. |