Handle Set Door

A quick learner from St. Petersburg, Florida says:
This lock was mounted on one side only with the mounting bolts held through the outside with sleeve nuts (slim threaded barrel sleeve with collar) and it appears that the opening for the locking hook were cut after manufacture and it like at one point the exterior handle holes did align with the mounting bolts for the lock.

Need to replace this lock and handles.
Thumbnail of the uploaded file named IMG_6250.jpeg
Thumbnail of the uploaded file named IMG_6251.jpeg
Thumbnail of the uploaded file named IMG_6252.jpeg
Thumbnail of the uploaded file named IMG_6253.jpeg
Thumbnail of the uploaded file named IMG_6255.jpeg
Profile picture of Bob
Bob from SWISCO responded:

This is tricky. The box handle set looks reminiscent of our 82-002, but it appears a pull was retro-fitted to the outside door. I am not certain if the handle set will work with this unusual setup, but it's our closest match, so look it over and see if you think it would fit. 

We do carry pulls that work for this handle set: see our 88-009, 88-002, or 88-001, but they are meant to just mount to the inside of the door, right on the box handle set itself.

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)