Replacement 2" pivot bars
A home owner from Marietta, GA says:
December 3, 2011
Hello,
I recently ordered some pivot bars from you that I thought would work with my vinyl window that were installed approximately 10 years ago. No information on the manufacturer unfortunately. The bars that I ordered were longer than the originals but I thought I could make them work, but they are too wide.
The original bars (photos attached) are 2" long, 1/4" wide and 3/16" thick and are stamped steel.
Please see if you have anything that will work for a replacement.
Thank you,
William
I recently ordered some pivot bars from you that I thought would work with my vinyl window that were installed approximately 10 years ago. No information on the manufacturer unfortunately. The bars that I ordered were longer than the originals but I thought I could make them work, but they are too wide.
The original bars (photos attached) are 2" long, 1/4" wide and 3/16" thick and are stamped steel.
Please see if you have anything that will work for a replacement.
Thank you,
William

![]() |
Donna from SWISCO responded:
December 8, 2011
We have located a possible replacement part. However, this part is not yet online. We will post an update on the discussion board as soon as the part is online and available for you to view.
Thank you for your patience. |
A quick learner from Marietta, GA says:
December 8, 2011
Thank you for your help. I will await your post.
![]() |
Donna from SWISCO responded:
December 13, 2011
Hi William, Please see new SWISCO product code 26-313, Pivot Bar. |