see included photo. the dimensions are 4" x 2" the distance between screws is approx 3 1/4 inch. Do you have anything to fit?
Thanks,
Joe

Looking at your pictures, it appears that your original handle has been riveted on. You will have to drill these rivets out of the handle before you can remove it. Normally, you would use a 1/8" drill bit. You can look at our 75-506, should you need one.
For the new handle, you can use our new 33-006, #42 Pop Rivet, to install it. You may also want to look at our 75-012S Professional Rivet Tool.