Missing Sliding Glass Door Lock

A home owner from Deer Park, WA. says:
Years ago, removed locking mechanism, and strike from frame of a sliding glass door, so the slider would close flush against the doggie door edge. Can't find, and can't remember what the parts looked like.

Removed the handles. On the inside of the handle is this information:

US Patent
Sash Controls
Canton SD

Need to identify the parts so I can order.

Thanks for your help,

Profile picture of Tom
Tom from SWISCO responded:
Thank you for posting, we are happy to help you find the correct part. To better assist you, could you send us some photos of your handle and door?
A home owner from Deer Park, WA. says:
See attached pictures................
User submitted image of their door hardware.
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
Thanks! The patio handle appears to be okay, judging by your photos. Based on your original post, it sounds like you need the internal mortise lock that goes in the door itself. There are a lot of possible matches that go with your handle set, though. Take a look at the following parts to get started: our 82-227, 82-226, and 82-218. One way to confirm which is best is to look at the edge of your door compare the holes and space leftover to these options. As for the strike plate, see our89-020 or 89-021D. Again, see if they match the holes in your door jamb. These are the most popular items that goes with your handles.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)